Scroll down to view specifications for Kolar competition shotgun models.

Specifications
Kolar Arms Competition Shotguns Deliver The Mark of Performance

• Tailored for Consistency
• Most Precise P.O.I. Adjustments
• Interchangeable Trigger Group
• Precise Trigger Pull
• Fast and Easy Reconfiguration
• Selectable and Adjustable
• Maximum Strength and Absolute Tolerances

MAX TRAP TA

Max Trap T/A High Profile – Over/Under – Standard

Max Trap T/A High Profile – Over Single – Standard

Low Profile – Unsingle – Standard

Precisely Set P.O.I.
The new Max T/A is available with either 34” un-single, 34” over-single or a 30” or 32” over-under. It features fully adjustable ribs on all barrels. With the addition of the new standard low-profile (LP) rib, the Max Series TA combo now offers a range of Point Of Impact (P.O.I.) capability from 60% to 150%.

All combos are delivered with the barrels set to the same P.O.I. unless otherwise specified.

Maximum Pattern Efficiency
The barrels on the Max T/A are the new light contour .740 bore, with extra-long forcing cones and factory CTs for maximum pattern efficiency.

A weight kit is available to meet your specific balance requirements when choosing the over-single barrel.

Unobstructed Target Acquisition
Stocks are designed to promote a heads-up gun mount, which promotes rapid unobstructed target acquisition. All stocks are fitted with a six-way adjustable comb. The forend is an extended beaver tail design. Both stock and forend are cut from high quality English walnut.

All guns are supplied in a Kolar hard case. New Kolar Custom Negrini Design.

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: 30″ and 32″ O/U. Single Barrel 32″ only available in low profile adjustable rib. 34” available in TA high top single with adjustable rib, TA high unsingle with adjustable rib, low profile fixed rib top single in 80% or 100% fixed POI. .740 LITE CONTOUR W/CT AND X-LONG FORCING CONE 
RIBS: RAMP TAPER VENTED W/ADJUSTABLE P.O.I.
TRIGGER: PULL OR FACTORY RELEASE ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVER TAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.

Max TA High Unsingle / Adjustable rib

 

HIGH: 60%-100% P.O.I.
EXTRA HIGH: 100%-150% P.O.I.

 

Max TA High Top single / Adjustable rib

HIGH: 70%-100% P.O.I.
EXTRA HIGH:  100%-140% P.O.I.

 

Max TA High O/U Adjustable rib

HIGH: 65%-100% P.O.I.
EXTRA HIGH: 100%-150% P.O.I.

Max TA Low Unsingle / Adjustable Rib

LOW PROFILE:  60%-90% P.O.I.

Max Low Top Single / O/U / Fixed Rib

LOW PROFILE: 80% or 100% P.O.I.

 

COIL SPRING DRIVEN TRIGGER  
SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE)  
TRAP RAMP RIB COMBO COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
T1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
T2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
T3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
T4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP STANDARD ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LT1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LT2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LT3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LT4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP HIGH ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LT1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LT2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LT3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LT4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP EXTRA HIGH ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LT1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LT2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LT3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LT4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4

Fine Woodworking

The stocks and forends on all Kolar guns are cut from English walnut and are available in both right or left-hand configurations. All Stocks include an adjustable comb.

Wood Upgrades

Super Standard: $POR
Grade II:$POR
Grade III:$POR
Exhibition:$POR

Wood blanks and intermediate levels of wood upgrades are also available. Price on request.

*Pricing is additional to base standard grade stock.

Invest In Your Individuality

To satisfy individual preferences and personal taste, Kolar offers a limited number of standard engraving patterns. Since every Kolar engraving is hand cut, each final product is unique. As a result, even the standardized engraving styles are somewhat different in their final execution. The Prestige, Legend, Select and Gold Elite are the basis of our 2013 engraving offerings. An appropriate wood upgrade is included with custom engraving.

Prestige

The Prestige features an open arrow style medium relief scroll with a decidedly European look. 100% coverage on receiver and forend iron, top lever and trigger guard. A gold trigger blade is standard and a complete gold trigger assembly is an option. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Legend

The Legend pattern makes its return and features a deep relief and hand-cut scroll. This timeless design features 100% coverage on the receiver and forend iron, top lever and trigger guard. All guns with this option come with gloss barrels and gold triggers. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Select

The Select features deeply sculpted leaf scroll with 100% coverage. The hand cut leaf is finished with a complete background stippling to highlight the unique pattern. The side panels of this model can be flat to enhance and differentiate it from other models. A complete gold trigger is standard. Receiver finish is French gray, gloss blue or nickel Cerakote finish. Top lever and trigger guard piercing is a P.O.R. option. Gold enhancement is a P.O.R. option.

Gold Elite

The Gold Elite features enhanced deep relief scroll with 100% coverage with gold enhancement line work on the receiver side panels and crown. The under panel of the receiver has the trademark engraved Kolar griffin in gold. A complete gold trigger is standard. Finish is either French Gray or gloss blue.

Custom Select

The Prestige features an open arrow style medium relief scroll with a decidedly European look. 100% coverage on receiver and forend iron, top lever and trigger guard. A gold trigger blade is standard and a complete gold trigger assembly is an option. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Custom Gold Elite

The Custom Gold Elite is an enhancement of the standard Gold Elite grade and has all the same features; 100% hand-cut, 100% background stippled and full coverage. In addition to this, the side panels and under panel of this model features a game scene with upland, waterfowl, raptor or a scene of your choice. Deep relief or Bulino style available. Barrels are gloss, trigger is gold and wood is commensurate with engraving.

Custom Grade

Our engravers can customize your Kolar to give it the personal enhancement that makes it uniquely yours. Whether your preferences are a deep relief scroll or an intricate Bulino style, we can engrave your gun to any scene or style you specify.

MAX TRAP TS

Max Trap T/S

Maximum Strength for a Lifetime of Use Receiver and forend iron are CNC machined from a solid bar of 4140 chrome-moly steel to withstand the rigors of a lifetime of use. The receiver, with its full hinge pin and a massive locking bolt, serve to balance the gun and contribute to its extremely soft recoil characteristics. A unique ejector system allows for ejection of spent shells, or it can be adjusted to lift only.

Absolute Tolerances & Perfect Balance The trigger housing and mechanism are also CNC machined to afford absolute tolerances. The hammer and sears are precision EDM wired from hardened tool steel to maintain crisp, consistent trigger feel. Trigger weight is set at a nominal 3.5 lbs. An optional factory release trigger is also available.

Superb Pointability & Minimal Recoil The Kolar T/S features an adjustable ribbed 34” barrel of mid placement design for superb pointability and minimal recoil. The barrel is available in a .740 lite contour.

Precise & Consistent Point of Impact Point-of-impact is perfected with a rib hinged at the breech and muzzle. This ensures precise, consistent Point Of Impact (P.O.I.). in all conditions. Ribs are of a ramp taper design and are available to allow for P.O.I. of 60% to 120%.

Handcrafted Details Stocks and forends on all Kolar T/S guns are cut from English walnut and are available in right or left hand configurations. Both are fitted with an adjustable comb and the forend is a beaver tail design. The Kolar T/S is available in standard grade with engraved configurations to follow. All guns are supplied in a Kolar hard case. New Kolar Custom Negrini Design.

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: 34”L .740 LITE CONTOUR W/CT AND X-LONG FORCING CONE 
RIBS: RAMP TAPER VENTED W/ADJUSTABLE P.O.I.
TRIGGER: PULL OR FACTORY RELEASE ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVER TAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.

Max Trap TS / Adjustable Rib

STANDARD: 60%-90% P.O.I.
HIGH: 70%-100% P.O.I.
EXTRA HIGH: 90%-120% P.O.I.
FULLY ADJUSTABLE RIB (STANDARD FEATURE)
A OR B HANGER
COIL SPRING DRIVEN TRIGGER  
SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE)  
TRAP RAMP RIB COMBO COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
T1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
T2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
T3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
T4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP STANDARD ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LT1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LT2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LT3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LT4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP HIGH ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LT1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LT2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LT3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LT4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP EXTRA HIGH ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LT1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LT2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LT3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LT4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4

Fine Woodworking

The stocks and forends on all Kolar guns are cut from English walnut and are available in both right or left-hand configurations. All Stocks include an adjustable comb. Wood Upgrades Super Standard: $POR Grade II:$POR Grade III:$POR Exhibition:$POR Wood blanks and intermediate levels of wood upgrades are also available. Price on request. *Pricing is additional to base standard grade stock.

Invest In Your Individuality

To satisfy individual preferences and personal taste, Kolar offers a limited number of standard engraving patterns. Since every Kolar engraving is hand cut, each final product is unique. As a result, even the standardized engraving styles are somewhat different in their final execution. The Prestige, Legend, Select and Gold Elite are the basis of our 2013 engraving offerings. An appropriate wood upgrade is included with custom engraving.

Prestige

The Prestige features an open arrow style medium relief scroll with a decidedly European look. 100% coverage on receiver and forend iron, top lever and trigger guard. A gold trigger blade is standard and a complete gold trigger assembly is an option. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Legend

The Legend pattern makes its return and features a deep relief and hand-cut scroll. This timeless design features 100% coverage on the receiver and forend iron, top lever and trigger guard. All guns with this option come with gloss barrels and gold triggers. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Select

The Select features deeply sculpted leaf scroll with 100% coverage. The hand cut leaf is finished with a complete background stippling to highlight the unique pattern. The side panels of this model can be flat to enhance and differentiate it from other models. A complete gold trigger is standard. Receiver finish is French gray, gloss blue or nickel Cerakote finish. Top lever and trigger guard piercing is a P.O.R. option. Gold enhancement is a P.O.R. option.

Gold Elite

The Gold Elite features enhanced deep relief scroll with 100% coverage with gold enhancement line work on the receiver side panels and crown. The under panel of the receiver has the trademark engraved Kolar griffin in gold. A complete gold trigger is standard. Finish is either French Gray or gloss blue.

Custom Select

The Prestige features an open arrow style medium relief scroll with a decidedly European look. 100% coverage on receiver and forend iron, top lever and trigger guard. A gold trigger blade is standard and a complete gold trigger assembly is an option. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Custom Gold Elite

The Custom Gold Elite is an enhancement of the standard Gold Elite grade and has all the same features; 100% hand-cut, 100% background stippled and full coverage. In addition to this, the side panels and under panel of this model features a game scene with upland, waterfowl, raptor or a scene of your choice. Deep relief or Bulino style available. Barrels are gloss, trigger is gold and wood is commensurate with engraving.

Custom Grade

Our engravers can customize your Kolar to give it the personal enhancement that makes it uniquely yours. Whether your preferences are a deep relief scroll or an intricate Bulino style, we can engrave your gun to any scene or style you specify.

MAX SKEET

Max Skeet Adjustable - Standard

Max Skeet Adjustable - Legend

Max Skeet Fixed Ramp Tapered - Standard

Dynamic Feel & Pointability
The legendary Kolar Max Skeet available in both Standard and Lite Models allowing the shooter the ability to choose the perfectly balanced shotgun depending on the shooters style. Featuring both the fixed ramp tapered rib for the more traditional shooter, and the adjustable ramp tapered rib for the shooter who prefers the advantage of precisely setting the P.O.I. from 50% to 70% while promoting a heads up, eyes level shooting position. Additionally, the hard coated T6061 rib offers a significant rigidity and lower mass. This gives the Max Skeet a dynamic feel and pointability unmatched in a tubed gun.

Maximum Pattern Efficiency
The standard barrels on the MAX SKT are semi-lite low recoiling .740 lite contour bore, with extra-long forcing cones and factory CTs. All skeet guns are fitted with Max AAA tube systems. The gun is also available as a matched weight, 2-barrel carrier set.

Precise, Consistent Trigger Pull
The re-designed Stage II mechanical trigger is selectable and adjustable for trigger blade placement. It features a patented interlock to eliminate the possibility of fan-firing. The all coil spring driven Stage II trigger features an enhanced hammer/sear configuration to ensure precise, consistent trigger pull.

The Precision of a Custom Stock
Kolar offers multiple factory stock dimensions allowing the shooter the flexibility to achieve a custom fit out of a factory available stock. This flexibility is unmatched in the industry and is essential for proper gun fit. This allows instant recognition of target line and variance. All stocks are fitted with new L/W titanium hardware and a six-way adjustable comb as standard equipment. A special L/W heel adjuster is optional. When combined with the adjustable comb you have all the precise fitting benefits of a custom stock. Handcrafted Details The forend is the traditional beaver tail design. Both stock and forend are cut from high quality English walnut. All guns are supplied in a Kolar hard case. New Kolar Custom Negrini Design.

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: OVER/UNDER 30”/.740 LITE CONTOUR BORE, XLC, CT/CT; W/MAX AAAS 32”/.740 LITE CONTOUR BORE, XLC, CT/CT; W/5 EXTENDED CTS
RIBS: TAPERED RIB FIXED, RAMP 50/50 OR 60/40 P.O.I. FULLY ADJUSTABLE. BARRELS PRE-SET AT FACTORY FOR 60% P.O.I. ADJUSTABLE FROM 50/50 TO 70/30.
TRIGGER: MAX STAGE II W/INTERLOCK ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVER TAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.
APPROX. WEIGHT:**: 9.5 LBS RAMP TAPERED ADJUSTABLE W/ MAX AAA 20,28 & 410 INSERTS
9.25 LBS RAMP TAPERED FIXED W/ MAX AAA 20,28 & 410 INSERTS

**WEIGHT MAY VARY BASED ON WOOD DENSITY MAX LITE SKEET 2BBL CARRIER SPECS

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: OVER/UNDER 30”/32” CARRIER SYSTEM BASED ON .740 LITE CONTOUR BARRELS
CARRIER 2 BBL SET W/MAX AAA 20, 28 & .410 INSERTS W/MATCHING .740 LITE CONTOUR /30” OR 32” BBL
RIBS: TAPERED RIB FIXED, RAMP 50/50 OR 60/40 P.O.I. FULLY ADJUSTABLE. BARRELS PRE-SET AT FACTORY FOR 60% P.O.I. ADJUSTABLE FROM 50/50 TO 70/30.
TRIGGER: MAX STAGE II W/INTERLOCK ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVER TAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.
APPROX. WEIGHT:**: 9.0 – 9.25 LBS* 30”/32” BBL RAMP TAPERED ADJUSTABLE CARRIER 2 BARREL SET W/ .740 LITE CONTOUR
8.75 – 9.0 LBS* 30”/32” BBL RAMP TAPERED FIXED CARRIER 2 BARREL SET W/ .740 LITE CONTOUR

**WEIGHT MAY VARY BASED ON WOOD DENSITY

ADJUSTABLE RIB
STANDARD: 50/50% – 70/30% P.O.I.
FIXED RAMP TAPERED RIB
STANDARD: 50/50% – 70/30% P.O.I.
ADJUSTABLE P.O.I. SYSTEM 50/50% – 70/30% P.O.I.  
SUB-GAUGE CARRIER BARREL  
AAA SUB-GAUGE TUBES  
FIXED RAMP RIB  
STAGE II COIL SPRING DRIVEN TRIGGER (STANDARD FEATURE)  
SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE)  
SKEET RAMP TAPERED ADJUSTABLE RIB COMB DIMENSIONS MONTECARLO HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LS1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LS2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LS3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LS4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
SKEET RAMP TAPERED FIXED RIB COMB DIMENSIONS MONTECARLO HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
SL 1 1/2 1 7/8 2 1/2 0 1/8 1/4 4 14 3/4
SLP 1 1/2 1 1/2 2 1/2 0 1/8 1/4 4 14 3/4

Fine Woodworking

The stocks and forends on all Kolar guns are cut from English walnut and are available in both right or left-hand configurations. All Stocks include an adjustable comb.

Wood Upgrades

Super Standard: $POR
Grade II:$POR
Grade III:$POR
Exhibition:$POR

Intermediate levels of wood upgrades are also available. Price on request.

*Pricing is additional to base standard grade stock.

Invest In Your Individuality

To satisfy individual preferences and personal taste, Kolar offers a limited number of standard engraving patterns. Since every Kolar engraving is hand cut, each final product is unique. As a result, even the standardized engraving styles are somewhat different in their final execution. The Prestige, Legend, Select and Gold Elite are the basis of our 2013 engraving offerings. An appropriate wood upgrade is included with custom engraving.

Prestige

The Prestige features an open arrow style medium relief scroll with a decidedly European look. 100% coverage on receiver and forend iron, top lever and trigger guard. A gold trigger blade is standard and a complete gold trigger assembly is an option. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Legend

The Legend pattern makes its return and features a deep relief and hand-cut scroll. This timeless design features 100% coverage on the receiver and forend iron, top lever and trigger guard. All guns with this option come with gloss barrels and gold triggers. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Select

The Select features deeply sculpted leaf scroll with 100% coverage. The hand cut leaf is finished with a complete background stippling to highlight the unique pattern. The side panels of this model can be flat to enhance and differentiate it from other models. A complete gold trigger is standard. Receiver finish is French gray, gloss blue or nickel Cerakote finish. Top lever and trigger guard piercing is a P.O.R. option. Gold enhancement is a P.O.R. option.

Gold Elite

The Gold Elite features enhanced deep relief scroll with 100% coverage with gold enhancement line work on the receiver side panels and crown. The under panel of the receiver has the trademark engraved Kolar griffin in gold. A complete gold trigger is standard. Finish is either French Gray or gloss blue.

Custom Select

The Prestige features an open arrow style medium relief scroll with a decidedly European look. 100% coverage on receiver and forend iron, top lever and trigger guard. A gold trigger blade is standard and a complete gold trigger assembly is an option. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Custom Gold Elite

The Custom Gold Elite is an enhancement of the standard Gold Elite grade and has all the same features; 100% hand-cut, 100% background stippled and full coverage. In addition to this, the side panels and under panel of this model features a game scene with upland, waterfowl, raptor or a scene of your choice. Deep relief or Bulino style available. Barrels are gloss, trigger is gold and wood is commensurate with engraving.

Custom Grade

Our engravers can customize your Kolar to give it the personal enhancement that makes it uniquely yours. Whether your preferences are a deep relief scroll or an intricate Bulino style, we can engrave your gun to any scene or style you specify.

MAX LITE SPORTING

Max Lite Sporting Adjustable Standard

Max Lite Sporting Ramp Tapered Legend

Max Lite Sporting Ramp Tapered Custom

Adjustability, Speed & Precision
The new Kolar Max Lite Sporting is now offered in both fixed and adjustable ramp tapered rib configurations. The more traditional fixed ramp tapered rib can be factory set at 50/50 or 60/40 P.O.I. The adjustable ramp tapered rib configuration allows the shooter the advantage of a raised head position for instant target recognition. You also have the ability to precisely set P.O.I. from 50/50 to 70/30. The ribs’ lower mass allows you to get the lighter barrels on the target more quickly for a faster shot.

Tailored for Consistency
The Max Lite Sporting Clays stock is available in mulitple stock options giving the shooter the ability to choose the proper configuration resutling in a custom fit. All stocks are fitted with a standard six-way adjustable comb. A L/W heel adjuster is optional. This results in a tailored, precise fitting stock that promotes a more consistent gun mount. The forend is a traditional Euro design, and both the stock and forend are cut from high quality English walnut.

Maximum Pattern Efficiency & Low Recoil
The standard barrels on the Max Lite Sporting Clay are Kolar’s innovative .740 lite contour. Combined with extra-long forcing cones and precise taper factory titanium CTs, they provide maximum pattern efficiency and extremely low recoil characteristics. The gun is available with a matched weight carrier barrel and Max Lite Sporting Clay inserts for sub-gauge events.

Selectable & Adjustable
The re-designed Stage II mechanical trigger is selectable and adjustable for trigger blade placement. It features a patented interlock to eliminate the possibility of fan-firing. The all coil, spring driven Stage II trigger features an enhanced hammer/sear configuration to ensure precise trigger pull.

All guns are supplied in a Kolar hard case.  New Kolar Custom Negrini Design.

MAX SKEET STANDARD SPECS

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: OVER/UNDER 30”/.740 LITE CONTOUR, XLC, CT/CT; W/5 EXTENDED CTS 32”/.740 LITE CONTOUR, XLC, CT/CT; W/5 EXTENDED CTS
CARRIER 2 BBL SET W/MAX AAA 20, 28 & .410 INSERTS (30” CARRIER BBL MATCHES 32”/.740 LITE CONTOUR BBL)
12GA / 20, 28, 410 2 BBL SET 3 BBL SET 4 BBL SET 30″/32″ .740 LITE CONTOUR XLC, CT/CT; W/5 EXTENDED CTS
RIBS: RAMP TAPERED RIB FIXED STANDARD FULLY ADJUSTABLE. BARRELS PRE-SET AT FACTORY FOR 60% P.O.I. ADJUSTABLE FROM 50/50  TO 70/30.
TRIGGER: MAX STAGE II W/INTERLOCK ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/EURO DESIGN FOREND ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.L/W ADJUSTABLE HEEL DEVICE OPTIONAL
APPROX. WEIGHT:**: 8.5 LBS RAMP TAPERED FIXED RIB, STANDARD
8.75 LBS RAMP TAPERED ADJUSTABLE RIB

**WEIGHT MAY VARY BASED ON WOOD DENSITY

ADJUSTABLE RIB
STANDARD: 50/50% – 70/30% P.O.I.
FIXED RAMP TAPERED RIB
STANDARD: 50% OR 60% P.O.I.
ADJUSTABLE P.O.I. SYSTEM 50/50% – 70/30% P.O.I.  
SUB-GAUGE CARRIER BARREL  
AAA SUB-GAUGE TUBES  
FIXED RAMP RIB  
STAGE II COIL SPRING DRIVEN TRIGGER (STANDARD FEATURE)  
SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE)  
SKEET RAMP TAPERED ADJUSTABLE RIB COMB DIMENSIONS MONTECARLO HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LS1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LS2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LS3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LS4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
SKEET RAMP TAPERED FIXED RIB COMB DIMENSIONS MONTECARLO HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
SL 1 1/2 1 7/8 2 1/2 0 1/8 1/4 4 14 3/4
SLP 1 1/2 1 1/2 2 1/2 0 1/8 1/4 4 14 3/4

Fine Woodworking

The stocks and forends on all Kolar guns are cut from English walnut and are available in both right or left-hand configurations. All Stocks include an adjustable comb.

Wood Upgrades

Super Standard: $POR
Grade II:$POR
Grade III:$POR
Exhibition:$POR

Wood blanks and intermediate levels of wood upgrades are also available. Price on request.

*Pricing is additional to base standard grade stock.

Invest In Your Individuality

To satisfy individual preferences and personal taste, Kolar offers a limited number of standard engraving patterns. Since every Kolar engraving is hand cut, each final product is unique. As a result, even the standardized engraving styles are somewhat different in their final execution. The Prestige, Legend, Select and Gold Elite are the basis of our 2013 engraving offerings. An appropriate wood upgrade is included with custom engraving.

Prestige

The Prestige features an open arrow style medium relief scroll with a decidedly European look. 100% coverage on receiver and forend iron, top lever and trigger guard. A gold trigger blade is standard and a complete gold trigger assembly is an option. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Legend

The Legend pattern makes its return and features a deep relief and hand-cut scroll. This timeless design features 100% coverage on the receiver and forend iron, top lever and trigger guard. All guns with this option come with gloss barrels and gold triggers. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Select

The Select features deeply sculpted leaf scroll with 100% coverage. The hand cut leaf is finished with a complete background stippling to highlight the unique pattern. The side panels of this model can be flat to enhance and differentiate it from other models. A complete gold trigger is standard. Receiver finish is French gray, gloss blue or nickel Cerakote finish. Top lever and trigger guard piercing is a P.O.R. option. Gold enhancement is a P.O.R. option.

Gold Elite

The Gold Elite features enhanced deep relief scroll with 100% coverage with gold enhancement line work on the receiver side panels and crown. The under panel of the receiver has the trademark engraved Kolar griffin in gold. A complete gold trigger is standard. Finish is either French Gray or gloss blue.

Custom Select

The Prestige features an open arrow style medium relief scroll with a decidedly European look. 100% coverage on receiver and forend iron, top lever and trigger guard. A gold trigger blade is standard and a complete gold trigger assembly is an option. Receiver finish is either French gray, gloss blue or nickel Cerakote finish. Gold line enhancement is a P.O.R. option.

Custom Gold Elite

The Custom Gold Elite is an enhancement of the standard Gold Elite grade and has all the same features; 100% hand-cut, 100% background stippled and full coverage. In addition to this, the side panels and under panel of this model features a game scene with upland, waterfowl, raptor or a scene of your choice. Deep relief or Bulino style available. Barrels are gloss, trigger is gold and wood is commensurate with engraving.

Custom Grade

Our engravers can customize your Kolar to give it the personal enhancement that makes it uniquely yours. Whether your preferences are a deep relief scroll or an intricate Bulino style, we can engrave your gun to any scene or style you specify.

Elite Shotguns Glenshaw, PA Store

Don & Donny Watt: 412-213-3557
3179 Harts Run Road, Glenshaw, PA 15116

Elite Shotguns Sales Rep Reno Nevada

Jim Cryan: 775-848-3458

Elite Shotguns San Antonio Store

National Shooting Complex - Building #5, Events Only

Elite Shotguns Sparta Store and Showroom

World Shooting Complex - Building #2

Elite Shotguns Petaluma California

Dan Lewis: 415-205-338

Elite Shotguns Marengo, Ohio

Cardinal Shooting Center - Building #C3, Events Only

Elite Shotguns Traveling Mobile Showroom

Multiple Locations - Traveling Mobile Showroom - Aaron Willoughby 606-481-0955

Stores & Showrooms

Glenshaw, PA Store
Monday: Closed
Tuesday: 10:30am - 6:00pm
Wednesday: 10:30am - 6:00pm
Thursday: 10:30am - 6:00pm
Friday: 10:30am - 4:00pm
Saturday: 9:30am - 4:00pm
Sunday: Closed
Phone: 412-213-3557 | Email
3179 Harts Run Road,
Glenshaw, PA 15116

San Antonio, TX
National Shooting Complex,
Building #5, Events Only

Marengo, OH
Cardinal Shooting Center,
Building #C3, Events Only

Sparta, IL
World Shooting and Recreational Complex,
Building #2, Events Only

Contacts

Dan Lewis, Petaluma, CA
Phone: 
415-205-3387 | Email

Aaron Willoughby
Elite Traveling Mobile Showroom
Phone: 
606-481-0955 | Email

Don Watt
Glenshaw, PA | Store & Showroom
Phone: 412-213-3557 | Email

Donny Watt
Glenshaw, PA | Store & Showroom
Phone: 412-213-3557| Email

Jim Cryan
Sales Rep | Reno, NV
Phone: 606-481-0955 | Email